The Unofficial User Manual for:

AntScope-2 + Android + BlueTooth

and RigExpert Antenna Analyzers

The addition of a BlueTooth interface to the RigExpert series of Antenna Analyzers was a major benefit to people wanting to measure their antenna's impedance at its feedpoint, instead at the end of the coax.

Together with the freeware software "AntScope-2", users can now connect their RigExpert antenna analyzers directly to the feedpoint of their antennas and measure impedance from the ground.  There is  more climbing ladders or towers necessary.

I was unable to find a user manual for running my AA-230 ZOOM analyzer via BlueTooth and Android, but after several hours of trial and error in the field, I was able to get everything working.  Realizing several other users were having difficulties sorting out the operation, I documented my experience in this unofficial user manual.



DISCLAIMER

The author assumes no responsibility or liability for any errors or omissions in the content of this site. The information contained in this site is provided on an "as is" basis with no guarantees of completeness, accuracy, usefulness or timeliness.

NOTE:  This manual focusses exclusively on running AntScope-2 via an ANDROID tablet or mobile phone, using BlueTooth (BLE) as an interface to the antenna analyzer. 

DOWNLOAD:

The BlueTooth + AntScope User Manual  -------->

for ANDROID tablets and mobile phones.

NEW: Ver.1.1 showing changes

.                  with ANDROID  Ver. 12 and 13.